Airmar PB100 Technical Information download pdf (Page 19)

9. Connect each wire in turn into the designated NMEA IN terminal. Loosen the

screw, insert the stripped end of the wire into the square hole and retighten the

screw.

Be sure the stripped end of the wire is inserted up to its insulation only

Do not

include any insulation inside the terminal. Gently tug on the wire to

ensure that it is securely fastened. Repeat this process until all the wires are

connected. Refer to the owner’s manual that came with the sensor and the

wiring diagram below (see Figure 12).

AIRMAR

WEATHER STATION

25-431-01

NMEA DISPLAY

ACTIVE RESEARCH LTD 2005

SHIELD

A/+ B/- A/+ B/- - + A/+

NMEA IN

NMEA OUT

POWER

NMEA

SHIELD

NMEA IN

NMEA OUT

POWER

NMEA

- +

B/-

B/- A/+ B/- A/+

USB

050818-001 ACTIS

SHIELD

PWR

GND

NMEA MULTIPLEXER

SHIELD

NMEA OUT

POWER

- +

B/- A/+

Figure 12. Wiring diagram to connect an external sensor

See the NMEA display manual

for power and shield connections.

Note: Power is available from

the Combiner as shown by

the dashed lines.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 59 60

Comments to this Manuals

No comments

Airmar PB100 Technical Information Page 19

Comments to this Manuals

Related products and manuals for Weather stations Airmar PB100